DAS AUDIO INTEGRAL Series, User Manual

Page: 26 / 45

26 INTEGRAL-M88 Manual
INTEGRAL
Front display - Menu and navigation
DANTE OUTPUTS
The INTEGRAL-M88 matrix units can feed up to 4 channels of DANTE
digital audio into the network. These output channels from the amplifier
to other elements of the network can be processed. The user can inde-
pendently select for each digital output channel (DANTE-1, 2, 3 and 4) its
processing. In the DANTE Outputs Menu, the options are the following:
· Each DANTE channel can be copied from
any analog input channel (IN A, B, C and D).
In this way, for example, it is possible to have
four analog inputs in one unit and inject
them into the network as four digital chan-
nels.
· Each DANTE channel can be a copy of any processed output channel
(OUT-1, OUT-2, OUT-3, ……OUT-8).
Remember, to select the channel you want to work with, press UP / DOWN
until you find it and then press ENTER. Once in the channel with the UP
/ DOWN keys select the source for the DANTE channel. To return to the
previous menu press BACK.
LINK MANAGER
The input and output channels can be grouped into groups. In this
way all the grouped channels will share all the settings (gain, delay,
equalizations, filters etc). There is a maximum of 4 groups available for
all outputs, named L-1, L-2, L-3, L-4. By default, in the unit the output
channels are not assigned to any group (OFF).
When there are different processing parameters in two different out-
put channels, for example OUT-1 and OUT-2 and they are grouped in
a link, for example, L-1, the last selected channel will modify its pro-
cessing parameters and inherit those of the first. Therefore, when mak-
ing LINK groups, it is always recommended to first select the channel
whose parameters should prevail.
Select within the LINK MANAGER
menu with the UP / DOWN keys
the channel on which you wish
to act; once in the channel, press
ENTER. This chosen channel
must be the channel whose pa-
rameters we want to copy to the
others. With the UP / DOWN keys
assign the name of the LINK or
group you want for this channel
(for example, we selected AMP-1
and L-1). Press BACK and return
to the LINK MANAGER menu. Se-
lect within the LINK MANAGER menu other channel (s) (in this case
AMP-2) that you want to add to the previous group by pressing EN-
TER to select the channel and then UP / DOWN until the name of the
group chosen previously is selected.
Groups created with this tool are stored in the global presets as an ex-
tra parameter when saving a memory.