2.0 Message reminder:
Activate notifications through the app.
Mobile notifications will also be received on the watch.
2.1 Enhanced measurement:
Turn on the enhanced
measurement, and the data will be more accurate.
2.2 Sedentary reminder:
Set the time period from start to end
and the sedentary time interval (minutes). When the sedentary time
is reached, the watch will vibrate and display the reminder icon.
2.3 Alarm reminder:
Click on "Watch Alarm" on the
app
to enter,
then click on the "+" in the upper right corner to set the alarm time,
and then click on "Save" in the upper right corner. When the alarm
time arrives,
the watch will vibrate
.
2.4 Reminder mode:
A Bright screen: When the alarm time set by the mobile phone's
arrives or a promotion message is received, the watch will
brighten
the screen and display the content;
B Vibration: When the alarm time is set on the mobile phone's APK
or a promotion message is received, the watch will light up
the
screen, display the contents, and vibrate;；
2.5 Gesture control:
You can set your watch to open when you
raise your hand.
2.6 Health monitoring:
You can freely select the time interval for
automatic detection, and detect automatically health data such as
heart rate.
2.7 Search mobile phone:
When the watch and the mobile
phone
app
are connected
you
can search on the watch and the
mobile phone will beep.
2.8 Shake to take photos:
The watch can control the camera
function of the mobile phone and take pictures remotely.
1) Please ensure that Bluetooth and mobile GPS are turned on. When searching for the
device via Bluetooth, make sure that no other device is connected. When searching for
the device via Bluetooth, keep a close distance between your mobile and smartwatch.
2) If the Bluetooth connection is unstable during operation, try restarting the watch and
connecting it to the mobile again. Be sure to turn on the automatic start for the
smartwatch application, in the settings of your mobile phone. Also turn off the battery
optimization (without restrictions) for the specific application, so that the continuous
application-smartwatch communication is not interrupted.
3) If there is a problem with the watch or its use, please contact the store where you
purchased it.
4) The measurements of the watch are for reference only and not for medical use.
Please follow your doctor's instructions and do not use the measurements to make your
own diagnosis.
5) The watch is waterproof with IP67 certification which means that it can withstand
accidental contact with water. However, it can not be used for diving or being under
water for a long time. In addition, the watch should not come in contact with hot water,
as steam can penetrate the seal and cause internal damage.
6) The company has the right to modify the contents of this user manual without prior
notice. Some functions differ depending on the software they carry.
7) CAUTION: Do not use a power adapter that gives more than 5v == 1A to charge the
device. If you use a charger larger than 1A for charging, the circuit and / or battery may
be damaged.
8) Once the watch is charging, disconnect the cable from the power supply to prevent a
short circuit if it comes in contact with conducting objects.
9) Do not leave the appliance and accessories in areas where the temperature is too
high or too low. Otherwise the device may malfunction.
10) Avoid hitting the device to reduce the risk of damage.
IP67: Dust resistant! Seawater is
prohibited.
Summary of Contents for SU10
Page 1: ...User Manual SU10 ...
