DAS.4 FD8, User Manual

Page: 10 / 11

5.3.9 Message
When the watch is connected to Bluetooth, mobile notifications will
be sent to the watch. (You must enable the applications you want
to receive notifications from)
5.3.10 Timer
Swipe left from the home screen and select the timer. Press to start
the count. During the count, you can press pause / start.
5.3.11 Setting
s

Language: Including different languages you can choose.

Screen display: Change dial , Brightness , Screen time ,
Turn wrist wake
setting
s
.

Do not disturb:
Turn ON/OFF
do not disturb mode.

Vibration: Set vibration intensity.

System: System version , Shut down , Reset settings.
1) Please ensure that Bluetooth and mobile GPS are turned on. When searching
for the device via Bluetooth, make sure that no other device is connected. When
searching for the device via Bluetooth, keep a close distance between your mobile
and smartwatch.
2) If the Bluetooth connection is unstable during operation, try restarting the watch
and connecting it to the mobile again. Be sure to turn on the automatic start for the
smartwatch application, in the settings of your mobile phone. Also turn off the
battery optimization (without restrictions) for the specific application, so that the
continuous application-smartwatch communication is not interrupted.
3) If there is a problem with the watch or its use, please contact the store where
you purchased it.
4) The measurements of the watch are for reference only and not for medical use.
Please follow your doctor's instructions and do not use the measurements to make
your own diagnosis.
5) The watch is waterproof with IP67 certification which means that it can withstand
accidental contact with water. However, it can not be used for diving or being under
water for a long time. In addition, the watch should not come in contact with hot
water, as steam can penetrate the seal and cause internal damage.
6) The company has the right to modify the contents of this user manual without
prior notice. Some functions differ depending on the software they carry.
7) CAUTION: Do not use a power adapter that gives more than 5v == 1A to charge
the device. If you use a charger larger than 1A for charging, the circuit and / or
battery may be damaged.
8) Once the watch is charging, disconnect the cable from the power supply to
prevent a short circuit if it comes in contact with conducting objects.
9) Do not leave the appliance and accessories in areas where the temperature is
too high or too low. Otherwise the device may malfunction.
10) Avoid hitting the device to reduce the risk of damage.
IP67: Dust resistant!
Seawater is prohibited.