Darwin Fitness EVO30, Assembly Instructions Manual, Page: 22 / 34

22
Evo 30
4.3 Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!)
after each training session.
The following routine tasks must be performed at the specified intervals:
Part Weekly Monthly
Display console C I
Plastic covers C I
Moisture of the brake I
Screws and cable connections I
Lubricate saddle/seat post with silicon gel I
Legend: C = clean; I = inspect
4.4 Lubrication of Brake
Lubrication is a highly important service activity.
This is absolutely essential, if the friction of the brake system
increases noticeably. Increased friction is indicated by jerky
movement in higher resistance levels.
The need for re-lubrication depends to a great extent on the
resistance settings and hours of use. We recommend you apply
one drop of the lubrication only when you feel the movement
becomes too jerky.
5 DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via an electricals recycling centre. Further information can be
obtained from your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling
of materials or other forms of recovery of old equipment, you make an important
contribution to the protection of the environment.