![background image](http://html1.mh-extra.com/html/darwin-fitness/df-wallbar/df-wallbar_assembly-instructions-manual_510603032.webp)
32
WALLBAR
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the
assembly in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
Assembly of the side planks
1.
Place a joint connector bolt (A) and two positioning pins (B) into the slots of the lower side
planks (3 & 4).
2.
Align the upper side planks (1 & 2) with the joint connector bolts (A) and the positioning pins
(B) and connect the upper side planks (1 & 2) with the lower side planks (3 & 4).
3.
Tighten the nuts on the joint connector bolts (A) with the wrench (L) and place the caps (C)
on the slots on the side planks.
Summary of Contents for DF-WALLBAR
