![background image](http://html1.mh-extra.com/html/darwin-fitness/df-rm50/df-rm50_assembly-and-operating-instructions-manual_510607012.webp)
66
4
66
#67 M6*10 2pcs
#71 OD20*ID8.5*1.5 4pcs
#66 M8*15 4pcs
#75 S 13-17
71
71
3
36
67
35
RM 50
12
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1
1. Turn the Slide Rail (3) and Seat (36) upside down as shown below.
2. Slide the Seat (36) onto the Slide Rail (3).
3. Screw in the Stopper (35) with two Flat Cross Screws (67).
4. Then attach the Rear Stand (4) to the Slide Rail (3) with four Washers (71) and four Outer Hex
Screws (66).
5. Tighten with the Screwdriver-Tool (75).
Summary of Contents for DF-RM50
Page 2: ...RM 50 2 ...
Page 35: ...35 8 3 Exploded Drawing ...