Darwin Fitness CT40, Assembly And Operating Instructions Manual

Page: 29 / 44

29
No pulse display
+ Sources of interference in
the room
+ unsuitable chest strap
+ Wrong position of chest
strap
+ Chest strap defective or
battery empty
+ Pulse display defective
+ Eliminate sources of interference (e.g.
mobile phone, WLAN, lawn mower
and vacuum cleaner robot, etc. ...)
+ Use a suitable chest strap (see
RECOMMENDED ACCESSORIES).
+ Reposition chest strap and/or
moisten electrodes
+ Changing batteries
+ Check if pulse display by hand pulse
possible
5.3 Error Codes and Troubleshooting
The electronics of the equipment continuously carries out tests. In case of deviations, an error code
appears on the display and normal operation is stopped for your safety.
PROBLEM
LCD error – software error etc.
SOLUTION
1. Hold Reset to start the console again.
2. Start the console again by disconnecting the power cable for about 15 seconds.
3. Disconnect and connect again all cable connections, see assembly instructions.
4. Change the console.
5. Contact a service technician of your contract partner.
Please contact Sport-Tiedje for technical support.