The use of attachments not recommended by the manufacturer may cause fire, electric shock or injury.
To avoid possibility of mixer being accidentally pulled off work area, which could result in damage to the
mixer or in personal injury, do not let cord hang over the edge of a table or counter.
To avoid damage to cord and possible fire hazard, do not let cord contact hot surfaces.
Do not attempt to repair the appliance yourself. This appliance must be repaired by a qualified
technician to avoid any hazard.
Keep the appliance and cord away from direct radiant heat from the sun, from damp surfaces, from
sharp edges and other dangers.
Use the appliance only for its intended purpose.
Do not use the appliance during cooking processes or with boiling liquids.
OVERVIEW
1.
Eject button
2.
Speed selector (0 to 5)
3.
Turbo button
4.
Handle
5.
Beaters (2)
6.
Dough hooks (2)
GETTING STARTED
Before using your hand mixer for the first time, wash the dough hooks and beaters in warm soapy water.
Rinse and dry thoroughly. Wipe the outer surface of the body with a damp cloth.
CAUTION:
To avoid injury when inserting or removing beaters or dough hooks, make sure that the
appliance is unplugged from the mains socket and the speed selector is set to the
0
position.
Select the attachment according to the required type of mix.
Beaters
: Used for liquid mixtures such as creams, egg-whites, confectionary doughs, etc.
Dough hooks
: Used for light doughs.
Insert the beater or dough hook with collar into the large hole. Push the beater or dough hook in until it
clicks into place. Insert the beater or dough hook without collar into the small hole and rotate slightly until
it is properly secured.
NOTE
: Never operate the appliance with one beater and one dough hook at the same time.
Large hole
Collar
3
Downloaded from www.vandenborre.be
