18
A self-adhesive set of protective films can be used for ad-
ditional protection of the downtube.
Before applying the pro-
tective film to the frame,
degrease and clean its
surface.
Correct tightening of the bicycle fasteners, nuts, and
bolts are essential. Too little force and the fastener
may not hold securely. Too much force and the fas-
tener may tear, stretch, distort or break the thread.
Either way, incorrect torque can damage the com-
ponent, which can cause you to lose control and fall.
In case of doubt or problems found during your test
ride, seek immediate advice from a professional bi-
cycle mechanic.
See the instructions of the suppliers of the suspen-
sion fork, rear shock, and other parts that come with
this frame. Do not use the bicycle until all problems
have been resolved. Riding a bicycle with any de-
fects may be dangerous to health and life. If you are
not a qualified bicycle mechanic, do not make any
of these adjustments yourself and seek advice from
your local bicycle dealer.
The rear suspension bolts (rear shock and pivots)
have been tightened at the factory to the specified
torque. If you re-adjust, take particular care when
re-tightening.
DO NOT
lubricate any of the pivot
points. The factory uses high-quality self-lubricat-
ing Teflon.
Tightening torques (Nm) for individual points on the
frame:
• rear shock mounting: 10-12 Nm
• suspension system bolts: 10-12 Nm
• rear wheel axle: 20 Nm
• rear brake mounting: 10 Nm
• derailleur hanger: 20 Nm
• seat post clamp: 6 Nm
• Remaining tightening torques:
9. TIGHTENING TORQUE
ACCESSORIES
:
The rocker arm neoprene tube protector should be
wrapped together with the rear derailleur cable to
protect the rocker arm from chain impacts.
