16
III. Using the telephone
LJ-110B
To switch the hold music on:
♦
inform the person on the other end of the
line about a music pause.
♦
Press the
SET/HOLD
button. The display
will show
Hold
. The telephone will start to
play music.
Note!
In activating this function using the UP/+ or DOWN/- button, you may select the melody you
wish the caller to hear. There are 8 melodies available, from which you can choose. These are
indicated by symbols from 00 to 07.
♦
You can replace the handset on the base.
The connection will not be interrupted.
The hold music will be heard through the
speaker located in the base unit of the
telephone.
♦
Lift the handset or press the
SP-PHONE
button to continue speaking. The Hold
function will be switched off.
Note!
If the handset is not replaced on the base, press the SET/HOLD button again to switch the hold
music off.
#
Two touch dial memory
Your telephone can store 7 telephone numbers in it’s memory. The
number can then be dialled by pressing two buttons. Each number that is
stored can have up to 16 digits.
To store a number in the memory:
♦
press the
STORE/VIP/
÷÷÷÷
button. The
display will show
INPUt
.
♦
Enter the number, to be stored in the
memory. The number will be displayed.
Note!
The pause can be stored in the memory by pressing RD/P button.
SET / HOLD
SP
-PHONE
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
0
#
