6
M I N I D A R T E Y E
– U S E R G U I D E
MONITOR CONTROLS
Switch on
Turn the system on using the power
switch located at (fig 1 (1)).
The splash panel displays
DartEye
Mini
– No keyboard.
If version 3 unit then screen will
display
DartEye Mini
– keyboard
when turned on if the keyboard is
connected.
The total length of cable fitted to the
unit is displayed momentarily in the
bottom right of the screen.
Battery Meter
Check the battery level by pressing
and holding button (fig 2(7)) on the
Hub Control Panel, each
illuminated segment represents
20% battery life remaining.
Brake
Release the brake to allow the
camera and cable to be used by
lifting and turning the spring
plunger. To engage the brake turn
the spring plunger and the plunger
will drop into the next hole on the
reel hub.
Skids
The 50mm Skid provided with the
system is for use in pipes from
50mm to 100mm. The Camera can
be used without the skid fitted if
pipes under 50mm diameter are to
be inspected.
Monitor Removal
To remove the monitor from the
frame, loosen the two star knobs on
the reverse of the monitor and slide
the monitor up. The monitor can
then be used remotely. To store the
monitor in the transit case (optional)
unscrew the collar from the
connection cable and then pull to
release.
Connection is the reverse of this
operation.
When refitting the monitor to the
frame the cable should be routed
through the central slot in the
monitor mount plate.
LIGHT OPERATION
The Mini DartEye Camera head
has six high output LED’s. Use the
control knob on the Hub Control
Panel to vary the intensity of the
LED’s depending on working
conditions.
