9
USER MANUAL
VOLTAGE PARAMETERS
While voltage is a parameter that will vary from artist to artist, the PowerBolt II has been tested
to operate at a minimum voltage of 4 Volts to a maximum voltage of 12 Volts.
Depending on the type of needle configuration, or brand you use, feel free to adjust the voltage to
obtain the desired performance.
WARRANTY
Darklab warrants that the device will perform efficiently when used as intended. Should this product
prove to be defective due to manufacturing issues, Darklab will repair/replace the device free of charge.
This warranty will be void if the device shows signs of having been tampered, disassembled, handled
roughly, dropped, overexposed to moisture or damage resulting in compromised functionality.
HANDY TIPS
The following tips will help you get the most out of your PowerBolt II and avoid potential issues:
• Do not exceed the suggested voltage
• Use only FDA-approved cold sterilization solutions for disinfection
• NOT AUTOCLAVABLE
ADDITIONAL INFORMATION
TROUBLESHOOTING
1.- Machine Manufacturer
FK Irons: 1771 NW 79th Avenue, Doral, Florida 33126
2.- Servicing Your Machine
As for any mechanical device, FK Irons strongly suggests that you service your device once a
year to ensure all working parts are working as expected. This ensures the optimal condition of
all working parts, including internal machine clean up and fresh lubrication. Routine servicing will
ensure that your machine remains functioning as intended. Service is subject to fees.
3.- Warning
Disconnect machine from any power source before making any adjustments.
For service inquiries, please contact [email protected].
For additional tips and tutorials, please visit Youtube.com/FKirons
