DARKGLASS.COM
EXPONENT 500 MANUAL v1.0
13
Editing the signal chain
By default, effects added to the signal chain are placed
at the
top
of the signal chain�
Move effects and the outputs/FX loop by
dragging and
dropping
each block�
In this example, the
Hall Reverb
is moved
after
the
XLR output� This means that the processed instrument
signal sent to the XLR output has
only
been processed
with the
Vintage Microtubes
and
Flamingo Flanger
�
The same signal is then processed with the
Hall Reverb
,
and sent to the FX loop, speaker output, and headphones
output�
Use the
Mixer
E
to set the levels of each of the outputs
and FX send/return� Mixer settings are unique to each
preset�
Default placement
Reverb moved in chain
Mixer
