Microtubes B7K
“10 Anniversary”
Limited Edition
An homeage to an icon
This limited edition is a celebration of the pedal that got us started - this is a
tribute to every bass player that believed in the adventure of cutting into the
mix and a commendation for the incredible support and loyalty that we have
received since our humble beginnings.
Controls
: Sets the volume of the overdriven signal.
: Sets the amount of saturation in the overdriven signal.
: Mixes the clean input signal with the overdriven signal. The clean
signal remains at unity gain while the volume of the overdriven signal is set
by the Level knob, allowing for fine control of the blend ratio.
: Sets the amount of low frequency content to saturate by selecting
between three different bass boost levels before the clipping stage.
: Sets the amount of treble content to saturate: The "Boost" setting
emphasizes the treble content extra clarity and presence. The "Flat"
position leaves this register untouched while the "Cut" position will reduce
the amount of high frequencies being saturated.
: +-12dB @ 100Hz
: +-12dB @ 1kHz
: +-12dB @ 2.8kHz
: +-12dB @ 5kHz
: A balanced version of the ¼” output, useful for running into PA’s or
studio mixing consoles.
Warning
The Microtubes B7K has a current draw of 30mA. Only use a regulated 9V
DC adapter with a center-negative plug. Due to ecological reasons it does
not accept batteries. Unregulated power supplies and/or higher voltages
may result in suboptimal noise performance and even damage your unit,
voiding the warranty.
Warranty
To activate the warranty, we encourage you to register your product on:
http://mypedal.darkglass.com and enter the serial number on the back of
your pedal.
Please contact us via email [email protected] before shipping a
product to us.
Dimensions
Width
94 mm (3.70 in)
Height
120 mm (4.72 in)
Depth
46 mm (1.81 in)
Weight
320 g (0.70 lb)
Disclaimer
In the interest of continuous improvement, specifications are subject to
change without notice. If you have any questions, please don’t hesitate to
contact us at www.darkglass.com
The manufacturer claims that the above product fulfills the requirements as
set by EN55013, EN55020, EN60555-2, EN60555-3, RoHS, WEEE.
Summary of Contents for MICROTUBES B7K
Page 1: ...U S E R M A N U A L ...
