background image

WARRANTY AND SPECS

SPECIFICATIONS

Input Impedance: 1M

Minimum Load Impedance: 2

Ω

Maximum Power Output: 500 Watts RMS @ 4

 (1khz 

full blast 2 min max) 20%THD
      450 Watts RMS @ 8

Power Amp Input Impedance: 1M

Power Amp Input Level: 2400 mW RMS
Pre-Amp Output Impedance: 1k

Pre-Amp Output Level: 2400 mW RMS

Maximum Power Consumption: approx. 700VA
Forced-air cooled
AC Input Power: 100-250 VAC (Via selector switch on 

left side panel).
Cycles: 50/60 Hz
Dimensions: 18.0 cm x 7.1 cm x 23.0 cm, l x h x w,
(7.1" x 2.8" x 9.1")
Weight: 2.4 kg (5.29 lbs)
Built and Engineered in Helsinki, Finland.
(00358) 504 757005

WARRANTY

Please register for your warranty at 

http://mypedal.darkglass.com. The Microtubes 500 is 

under warranty to the original owner for a period of three 

years against manufacturing defects in the country where 

the product was originally purchased.

If you experience a problem with the unit, please contact 

[email protected] to receive a Return Authorization 

number or for information on the nearest authorized 

repair center. A copy of your original receipt must be 

included with all warranty repairs. You are responsible for 

all shipping charges. The unit must be shipped to us 

freight prepaid. We will return the unit freight collect. 

Darkglass Electronics Oy is not responsible for shipping 

damage either to or from our service center. Claims must 

be filed with the carrier. For repairs please contact your 

local dealer or distributor for your country’s specific 

warranty period and repair procedures. Darkglass®, 

Microtubes®, and Microtubes Engine are registered 

trademarks of Darkglass Electronics OY.

Summary of Contents for Microtubes 500 v2











Reviews: