Darim B-DVR, User Manual

Page: 91 / 95

TROUBLESHOOTING
B-DVR User’s Guide
83
9.2 Messages occurred B-DVR activation
·
When switching on B-DVR
message symptom solution
“Rec:LoadClip error” Cannot read Information from HDD Make sure HDD jumper is in MASTER
mode and reboot B-DVR again. The
same symptom is occurred again, set up
HDD in Low Level Format. Needs A/S
of HDD when still having problem.
“Please, backup clips” HDD is not compatible with older B-
DVR’s HDD.
Clips were made in older B-DVR, HDD
is not compatible with used before.
Please save clips by using B-DVR
desktop software then make all clips in
B-DVR HDD to use properly.
· When pressing Menu button
“Config save error!!!”
“Config read error!!!”
Cannot read or save Information
from HDD
Make sure HDD jumper is in MASTER
mode and reboot B-DVR again. The
same symptom is occurred again, set up
HDD in Low Level Format. Needs A/S
of HDD when still having problem.
· Messages in palying
“No MPEG Clips”
No saved MPEG-2 video clip in HDD
“Ready”
Being ready for playing MPEG-2 video
clip
"Beginning of clip" Located in the beginning position of
MPEG-2 video clip
"End of clip" Located in the last position of MPEG-2
video clip
"Forced Stop" Play mode is forced to stop due to error
of B-DVR
· Messages in recording
"End of HDD"
Full of MPEG-2 video clips in HDD
“Reached max-time of
Stop recording due to over 13 hours