System Requirement
-
Win 98, Win 2000,ME or Win XP Operating System
-
IBM PC or compatible
-
Available PS2 or USB port
-
CD-ROM or DVD-ROM drive
Hardware Installation
1.Connecting the receiver module
For USB Interface (If no PS/2 Port)
-
Plug the receiver cable into the USB port of your system.
-
System will automatically detect for new hardware.
-
Follow system instruction for setup
For PS/2 (If no USB port)
-
Connect the PS/2 adaptor to the USB connector of
the receiver, and plug into the mouse PS/2 port.
-
Connect the PS/2 cable (blue) to the keyboard PS/2
port.
-
Restart your system.
2. Load batteries in RF keyboard ( 2 AA batteries for keyboard)
3. Synchronizing the receiver and wireless keyboard
A. Press the connect button on top of the receiver, then press the button on the bottom
of keyboard within 10 seconds.
B. If the keyboard did not connect, please repeat step A again.
Software Installation
-
Insert CD Driver into CD-ROM or DVD drive.
-
The system should run automatically; if not, double click “setup.exe”
-
The onscreen setup will guide you through rest of the process.
-
After the software installation is completed, you will be prompted to restart your
computer.
