Rev. 01
©2020 Darfon Electronics Corp.
8
| Page
INSTALLATION MANUAL
DL-300 DATA LOGGER
CONFIGURING FOR WIFI
Step 1 .
Connect the computer to the DL-300 through WiFi. The password is SBC700ap. The
network name will be “DL300_” followed by the last 6 characters of the WiFi MAC address.
The WiFi MAC address label is located on either the front or side of the DL-300.
Step 2 .
Open a web browser and go to “192.168.100.1”. If you are redirected to a warning page, click on “Advanced” and then “Proceed”.
If not, then go to the next step.
Note: The wording and appearance of the warning page will vary depending on which browser is used.
Step 3 .
Log in with username
root
and password
SBC700pw
.
Step 4 .
In the sidebar menu, click on “Network”.
SBC700 | OpenWrt 18.06.2 r7676-cddd7b4c77 | Load: 0.00 0.00 0.00
Notes:
■
The data logger must have power and the antenna must be attached.
■
If power was just connected to the DL-300, it will take 1 minute before
the network appears on your computer.