1.
b. Charging limiting protection
2.
c. Over Voltage protection
3.
Temperature & Humidity : -10-40℃ & 5%--90%
4.
Status LED display :
5.
Dimension: Max--- 176*91*44 (mm)
B.
Trouble shooting :
◆
When getting through AC power, please check the power LED lighted “Red” first. (not plug-in Battery yet ) , If
power LED not lighted “Red”,
a.
Please confirm the AC power cord is well connected or not.
b.
After check AC power cord is well & LED still not lighted “Red”, please send back to repair
When getting through AC power & the power LED lighted “Red” & plug-in Battery , if power LED is
Blinking Red or
Red
, please check
a.
If the output plug is well connected or is it with reverse polarity?
Please confirm the connection of the connector.
b.
If the battery is out of use?
Please replace of the new battery
c.
If the charger broken?
Please send back to repair
◆
Please remove AC power and plug-in again if LED lighted Orange blinking. However, if the LED Orange blinking
symptom was still occurred after doing charger reset, please return to the supplier.
◆
Please avoid to plug in & out quickly in turns.
C.
Attention :
1.
The charger is designed for Li-ion battery only
2.
Please operate charger in an open area to keep good ventilation
3.
This charger is only for indoor used.
4.
If there is any problem, please return to local dealer or services center
Do not try to open and repair the charger by yourself
