VDSL2 Modem User Manual
- 9 -
Figure 2.2
2.3.4 VDSL MODEM WORK MODE CONFIGURATION
1
．
For different protocols, the users need to set VDSL Modem accordingly as listed below:
Table 2.2
PPPoE
PPPoA
ATM VC
Protocol
Use DNS
User Name
Password
√
PPPoE
Enable
√
√
√
PPPoA
Enable
√
√
1483 Bridged
Lower interface
Default route
√
Disable
Note:
√
means configure according to VDSL service provider’s instructed value.
PPPoE can also be realized via third party dialup software.
User Manual
Reference Chapter
PPPoE
PPPoA
1483 Bridged
3.3
3.3
3.2
2
．
After getting through every page for parameters set-up, click “Apply” to save the value in VDSL MODEM
3
．
Click the “
Restore Default Settings
” on “
Management
” Tab to enter the saving configuration page as
Figure 2.3. After the Modem reboot,The VDSL MODEM will work on the new parameters.
