DB101 ADSL MODEM Manual
- 10 -
3.
Press ALT+C and a control box will appear. The default parameters as shown below:
•
The value of VPI and VCI are set to the value of VPI=0 & VCI=32.
•
The Encapsulation mode is the default value “PPP over Ethernet LLCSNAP (RFC2516)”.
•
The maxim cell speed is 1500. (Recommend not modifying).
•
The maxim message package length is line rate. (Recommend not modifying).
Figure 3.4
4. If dial-up mode is PPPoA, then “PPP over ATM VCMUX(RFC2364) or PPP over ATM LLC
(RFC2364) ”should be selected in the “Encapsulation mode” box. As shown figure 3.5.
Figure 3.5
5 Click “OK” button to finish the installation.
