Instructions for use
Indications
For prevention and support during sport and everyday life of mild, acute
ankle injuries.
Web™ Ankle Brace
Ankle Brace
It is highly recommended that a sock be worn when using the
Web™ Ankle Brace.
1. Check the stay placement before applying the brace. The rigid stays are
marked INSIDe – for the inside of the ankle and OUTSIDe – for the
outside of the ankle. The stays may be switched to accommodate a left
or right ankle.
a. Medial – inside Stay
b. Lateral – outside Stay
2. Open up the back of the brace, slide your foot into the brace and secure
velcro backing evenly.
3. Grasp the lower straps and adjust for equal length. Stretch the straps
and wrap them around your ankle, securing them in the back.
4. Cross the upper strap over the center and wrap around the top of ankle
to secure.
5. The bungee closure system can be easily adjusted without removing your
shoe. Simply tighten and adjust the straps as needed to ensure consistent
compression and a snug fit.
6. An adhesive backed foam spacer is included with the brace. The spacer
can be trimmed and placed on the rigid stays if more padding is needed
for comfort.
Caution
Do not over tighten – this could lead to decreased circulation. If you
experience pain, abnormal swelling or skin irritation, discontinue use and
contact your medical provider. If the product is improperly handled its
function and optimal safety can no longer be guaranteed.
1.
2.
a
b
4.
3.
5.
6.
