6
I N S T R U C T I O N M A N U A L
Peg out and tension the guy ropes if required. Your Dusk to Dawn swag set up is now complete.
PACK DOWN
1. Partially close all the zips, door covers and window flaps, leaving them slightly open will allow for the air to
escape while rolling up. Remove pegs and guy ropes if used.
2. Release the trigger of the spreader pole and remove it from the eyelets.
3. Unclip the swag from the composite poles one end at a time.
4. Disassemble all of the poles in preparation for step 5 below.
5. While the swag is laid out flat, bring any overhanging canvas and ropes into the centre of the swag. Beginning
from the head end, start rolling the swag as tightly as possible in an attempt to expel as much air as possible
to achieve a compact roll. Tip: Using your knees, or two people while rolling, will assist in getting the swag as
compact as possible. Just before completing the rolling process, place all the disassembled poles between the
fabric and continue the rolling process to the end.
6. Bring the two compression straps together and loop through the double D-rings, do not over tighten the straps.
NOTE
Allow a wet or damp swag to dry thoroughly before pack down. If this is not possible, unroll swag as soon as
possible. Allow to fully dry out before re-packing and storing.
HEAD END POLE
FOOT END POLE
