Step 3
During the swag set-up, before a emp ng to insert the Aluminium pole into the pin, it is important
to centralize the swag on the aluminium pole. Hold up the sleeve with your hand in order to take the
weight of the swag and slide the aluminium pole into the other corresponding pin. Repeat this
process for the other pole whilst correc ng the swag skin as you assemble.
Step 4
Clip the swag to the aluminium poles one end at a me. A good technique for a aching the clips is to
alternate from one side to the other. Top le then top right, second le and then second right and so
on. Repeat this process for the other pole whilst correc ng the swag skin as you assemble.
.
Step 5
Using the steel pegs provided, place one through each ring on the base of the swag and secure it to
the ground.
Place a guy rope at the end of the swag through the eyelet, loop the guy rope around a steel peg
tension the swag then secures it to the ground.
