
Page 6 of 16
4. Installation
4.1 Operation
To use the MAGW200 you will need to locate a power socket within range of your
examination point, plug the light into your desired location then:
1.
Reduce light in the room to a minimum
2.
Turn the power switch ON
3.
Allow around 60 seconds for the bulbs to warm up
4.
When finished, turn off the power switch to preserve bulb life
Summary of Contents for M Series
