USB-DIO6400 Users Manual (Rev 1.1)
-
17-
http://www.daqsystem.com
4. Installation
You confirm whether or not the packing contents are in good order before installation.
4.1 Confirm Product Contents
Product Contents
1. USB-DIO6400 Board
2. USB(A-B) Cable
3. CD (Driver/Manual/API/Sample Source etc.)
4.2 Driver Installation
For USB-DIO6400 board installation at PC is as follows. There isn
’t a jumper especially to set up
for board installation because USB board is a Hot Plug and Plug & Play device.
User Environment : Windows 2000 SP4 over, Windows XP SP1 over
(1) First, open the box and put the USB-DIO6400 product on safe table.
(2) The USB-DIO6400 board connects to PC through USB A-B cable.
When the cable connect, it will be install automatically drive searching at Windows Operating
system.
(3) The driver installation is as follows. The installation order is as follows, explain Windows XP
basis if there isn
’t special explanation.