UVC-FRM01 Users Manual (Rev 1.0)
-
13-
http://www.daqsystem.com
(3)
“Go” button
Show the video captured by CAM.
If you want to change the image image, you can select and apply Filter,
brightness, and contrast.
To switch to full screen mode, press "f" on the image screen.
To close the image screen, enter "Esc" in the image screen.
(4)
“Filter” Selection
Turns Gaussian filter application on/off.
(5)
“Brightness” Selection
You can adjust the brightness in 40 steps from -20 to 20.
(6)
“Contrast” button
You can adjust the contrast in 40 steps from -20 to 20.
