PCI-AIO05 Users Manual (Rev 1.1)
-
20-
http://www.daqsystem.com
(6)
Select Range
Set up the ADC input range per channel. (0 to 5, ±5, 0 to 10V, ±10V))
(7)
Average Numbers
It designate the data number that a moving average is applied to 0 ~ 255.
It is not applied to AD data collection by ADC_GetData() function.
(8)
Select Resolution
Set up AD Data width (bit).
The AD converter of board can support nine resolution (16 ~ 24bit).
(9)
„ADC Read All‟ Button
Read the all current ADC input.
(10)
ADC Auto Read
Auto read all current ADC value.
(11)
CH0(BK), CH1(B), CH2(R), CH3(G)
It display a value of CH0 ~ CH4 by color.
CH0(BK) : BlacK
CH1(B) : Blue
CH2(R) : Red
CH3(G) : Green
8.3 ADC Graph
(1)
Offset
It is an offset to display graph.
As an offset value is added to data collection, it is used if data aren
‟t marked to a graph.
(2)
Divide
It is a division value to display graph.
It marks let the data reduction in case of the data aren
‟t marked if the collected data is too large.
(3)
„Set‟ Button
Set the Offset, Divide value.
