8
21. Input 1 impedance/level switch
This switch allows you to set up
combo input 1 (30)
input for line level, microphone level with phantom
power or microphone level without phantom power.
22.
GND Screw
This screw offers a separate ground connection. Can be useful in case of grounding problems.
23.
AC Inlet with integrated fuse holder
This connector is meant for the connection of the supplied main cord. Connect one end of the power
cord to the connector, the other end to the mains, then turn on the
power (22)
switch to operate the
unit.
Make sure that the supply voltage matches the operation voltage before connecting the unit to mains.
Replace the fuse only with a fuse of the same specification (230V:T3,15A, 115V:T6,3A).
24. Pre out
RCA preamp output. For connecting the (mono) input of an effect device.
Make sure the preamp and poweramp sockets are connected if no device is inserted, otherwise you
won’t get any output!
25.
Amp in input
RCA power amp input. For connecting the (mono) output of an effect device.
Make sure the preamp and poweramp sockets are connected if no device is inserted, otherwise you
won’t get any output!
26.
Aux input
RCA stereo input for connecting a line level device such as an I-pod, CD player etc.
27. Combo input 4
Combo input for channel 4. Accepts balanced or unbalanced inputs.
28. Combo input 3
Combo input for channel 3. Accepts balanced or unbalanced inputs.
29. Combo input 2
Combo input for channel 2. Accepts balanced or unbalanced inputs.
30. Combo input 1
Combo input for channel 1. Accepts balanced or unbalanced inputs.
Terminals
