16
WMS4-W
Product code: D3831
Adjusting the Angle
You can adjust the angle of the device with the adjustment screws (10).
To adjust the angle, follow the steps below:
01)
Fold the rubber ball-joint cover (03) to get access to the adjustment screws (10).
02)
Loosen the adjustment screws (10) with the hex key (Fig. 19).
Fig. 19
03)
Tilt the device. The tilt range is 30° in all directions (Fig. 20).
Fig. 20
04)
Rotate the ball-joint (11) to set the device in a vertical or horizontal orientation (Fig. 21). The ball-joint
rotation range is 90°.
Fig. 21
05)
Tighten the adjustment screws (10) with the hex key, so that the device cannot move freely.
06)
Unfold the rubber ball-joint cover (03).
Summary of Contents for WMS4-W
Page 11: ...10 WMS4 W Product code D3831 Dimensions Fig 06...
Page 22: ...21 WMS4 W Product code D3831...
Page 23: ...22 WMS4 W Product code D3831...
Page 24: ...2022 DAP...
