DAPAudio WMS4-B, User Manual

Page: 12 / 24

11
WMS4-B
Product code: D3830
4. Installation and Setup
Safety Instructions for Installation
WARNING
Incorrect installation can cause serious injuries and damage of property.
Installation Site Requirements
● The device can be used outdoors.
● The device can be mounted on a wall in a vertical or horizontal orientation.
● The device must be installed away from heating sources.
● The maximum ambient temperature t
a
= 45 °C must never be exceeded.
● The relative humidity must not exceed 50 % with an ambient temperature of 45 °C.
Mounting and Setup
To mount the device, you need:
● Phillips screwdriver (PH1)
● Hex key (5 mm)
● Anchors
● Drill bits
● Power drill
To mount and set up the device, follow the steps below:
Drill mounting holes on the wall. See 4.3.1. Drilling Mounting Holes on page 12.
Connect the amplifier and daisy-chain the WMS speakers. See 4.3.2. Connecting Devices on page
13.
Install the mounting plate (07) on the wall. See 4.3.3. Installing the Mounting Plate on page 14.
Install the speaker on the mounting plate (07). See 4.3.4. Installing the Speaker on page 15.
Adjust the angle of the device. See 4.3.5. Adjusting the Angle on page 16.
Adjust the orientation of the logo. See 4.3.6. Adjusting the Logo on page 17.
Connect the amplifier to the power supply. See 4.3.7. Connecting the Amplifier on page 18.
Switch on the amplifier.