background image

 

  

 

 

   

 

Ordercode: D6534 

VPC-12

 

IMPORTANT: 

The manufacturer will not accept liability for any resulting damages caused by the non-observance  
of this manual or any unauthorized modification to the system. 
 

 

Never remove warning or informative labels from the unit. 

 

Never use anything to cover the ground contact. 

 

Never leave any cables lying around. 

 

Do not set the input signal level higher than required to drive the equipment to full output. 

 

Do not switch the system on and off in short intervals, as this would reduce the system’s life. 

 

Do not open the device and do not modify the device. 

 

Only use system indoors, avoid contact with water or other liquids. 

 

Avoid flames and do not put close to flammable liquids or gases. 

 

Make sure you do not use the wrong kind of cables or defective cables. 

 

Make sure that the available voltage is not higher than stated. 

 

Take care of your speaker wires, as they should be free of damage. Damaged speaker wires might 
result in poor sound quality and can damage amplifiers. 

 

No main power shall be connected to the device; doing so will cause damage. 

 

Extreme frequency boosts in connection with a high input signal level may lead to overdriving your 
equipment. Should this occur, it is necessary to reduce the input signal level. 

 

If system is dropped or struck, disconnect mains power supply immediately. Have a qualified 
engineer inspect for safety before operating. 

 

If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not 
switch it on immediately. The arising condensation water might damage your system. Leave the 
system switched off until it has reached room temperature. 

 

If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely 
(preferably in the original packing material), and return it to your Dap Audio dealer for service. 

 

Repairs, servicing and electric connection must be carried out by a qualified technician. 

 

WARRANTY: Till one year after date of purchase. 

 

Operating Determinations 

If this system is operated in any other way, than the one described in this manual, the product may suffer 
damages and the warranty becomes void.  
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc. 
 

You endanger your own safety and the safety of others! 

 

Improper installation can cause serious injuries and damage of property ! 

 
 

 

Summary of Contents for VPC-12









Reviews: