5
Frontpanel
Fig. 1
1. "CLIP" Indicator
Any illumination of the clip LED indicates distortion. In this case, check the output signal of your mixer
and turn down the input gain control. Please keep in mind that the power amplifier cannot correct
any distortion.
2. LED "STAND BY"
This indicator lights when you switch your power amplifier on and stays illuminated for a few seconds
(during this time the power amplifier makes an auto-test). When the LED dims, it means the power
amplifier is ready to work.
3. "SIGNAL" Indicator
The illumination of the LED indicates a safe operation.
4. Air vents
Don't obstruct or insert objects into air vents.
5. Channel 1 Volume Control
In stereo mode, this potentiometer allows the adjustment of the channel 1 input level. (left channel ).
In Bridge mode, this potentiometer allows the adjustment of the two channels at the same time.
6. "POWER" Indicator
This indicator lights when the power amplifier is switched on.
