15
TCD-100BT
Odercode: D1257
Tuner Operations
Selecting a Radio Station using the Up/ Down buttons
Press the
Up (17, 52)
or
Down (18, 51)
button to tune stepwise. Pressing and holding the
Up (17, 52)
or
Down (18, 51)
button for more than 1 second will start auto search. Now the searching will stop at the
first station which is strong enough.
Selecting a Radio Station using the
Direct
function
01)
If you’re in CD mode (the
CD (9)
LED is lit), press the
CD/Tuner (55)
button and select Tuner Mode.
(The
Tuner (12)
LED is lit).
02)
Press the
Direct
(35)
button. The tuner frequency in the display will change to underscores.
03)
Use the
Select (34)
buttons to enter desired frequency without a decimal point.
04)
Press the
Direct
(35)
button again to confirm. Now the TCD-100 sets the decimal point at the right
place.
Selecting a Preset Station
The TCD-100BT allows you to store your favorite radio stations in up to 60 memory presets. Select a preset
by using the
Select (34)
buttons and/or the
+10 (36)
button. As an alternative you can use the
M-Down
(37)
and
M-Up
(38)
buttons. Make sure the unit is in Tuner mode when using the remote control.
Storing a Station in Memory
01)
Select a radio station as described in
1.
or
2.
02)
Press the
Memory (48)
button. In the display the symbol MEM will start blinking. Now use the
Select
(34)
and/or
+10 (36)
buttons
to select the desired memory location.
03)
Press the
Memory (48)
button again to store the preset.
Setting up the Sleep Mode Timer
01)
If you’re in CD mode, press the
CD/Tuner (34)
button and select Tuner Mode (the
Tuner (12)
LED will
light up).
02)
Press the
Sleep
(54)
button. The display will show 90, this means that the Tuner will switch to sleep
mode in 90 minutes.
03)
Pressing the
Sleep
(54)
button several times let’s you change the time. You can set up the sleep
mode timer between 90 minutes and off in 10 minute steps as shown below.
04)
After 3 seconds the timer will start automatically. The sleep mode will be indicated by the “sleep”
text which will show up above the radio frequency.
05)
As the time you set up has passed, the tuner backlight will dim. And the tuner output will be muted.
06)
You can exit the sleep mode by pressing the
Sleep
(54)
button. Make sure you switch the timer off.
Otherwise the sleep timer will start again.
Summary of Contents for TCD-100BT
Page 19: ...18 TCD 100BT Odercode D1257 Notes...
Page 20: ...2014 DAP Audio...
