O P E R A T I N G
1. Turn the power dial to turn on and the speed indicator and the strobe-illuminator
will light up.
2. Turn on and raise the target light for illumination the stylus tip by pushing the
target light button.
3. Place a record on the turntable mat. When playing a 45rpm record with a large
center hole; place the 45-rpm adapter on the center spindle.
4. Set the rotation speed (33/45/78) to match the record.
5. Release the arm clamp.
6. Set the cueing lever to the up position.
7. Press the Start/Stop button and the turntable platter will start to rotate.
8. Move the tonearm over the desired groove.
9. Set the cueing lever to the down position, the tonearm will descend slowly onto
the record and play begins.
10. Set the desired pitch adjust range by depressing the QUARTZ button until the
desired pitch is reached.
Options are +/-10% or +/-20%.
11. Adjust the pitch to a desirable speed. During play, observe the strobe dots. If the
strobe dots appear to the right, the pitch is slower than the rated speed. If they
flow to the left, the rated speed.
If the strobe dots appear stationary, which means the platter is in normal
turntable speed, move the pitch control slider up or down to adjust the speed.
12. To suspend play, lift tone arm with cueing lever.
13. When play is finished, raise the cueing lever, move the tonearm to the armrest
and secure the tonearm with the arm clamp.
14. Turn the target light off by pushing the light back down.
15. Press the Start/Stop button to stop the platter rotating.
16. Turn the power dial to turn off the power.
5
