5
Back panel
Fig. 2
1. Input connector
The two Speakon connectors are wired in parallel and can be used as input or link output.
Only the 1+ and 1- terminal of the Speakon sockets are connected.
2. Output connector
The two Speakon connectors are wired in parallel and can be used as input or link output.
Only the 1+ and 1- terminal of the Speakon sockets are connected.
Installation
Remove all packing materials from the RX-12. Check that all foam and plastic padding is removed.
Connect all cables.
Damages caused by non-observance are not subject to warranty.
Maintenance
The RX-12 requires almost no maintenance. However, you should keep the unit clean. Disconnect the
speaker cables, and then wipe the cover with a damp cloth. Do not immerse in liquid.
Summary of Contents for RX-12
Page 9: ...2011 Dap Audio...
