7
Ordercode: D3512
PRA-82 2 x 85W
Installation
Remove all packing materials from the PRA-82 2 x 85W. Check that all foam and plastic padding is
removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Fig. 03
01)
Connect the active speaker to the passive speaker, by means of the included speaker cable.
02)
Connect your mixer to the RCA line input connector (07), by means of an RCA cable.
03)
Connect power supply to the mixer, then connect power supply to the speakers using the included
IEC to Schuko power cable.
Summary of Contents for PRA-82
Page 11: ...10 Ordercode D3512 PRA 82 2 x 85W Dimensions...
Page 12: ...2018 DAP Audio...
