29
PA-380TU 80W 100V Amplifier
Product code: D6170
Basic Cleaning Instructions
To clean the device, follow the steps below:
Disconnect the device from the electrical power supply.
Allow the device to cool down for 5 minutes.
03)
Clean the device with a soft, lint-free cloth.
Attention
●
Do not immerse the device in liquid.
●
Do not use alcohol or solvents.
Corrective Maintenance
The device does not contain user-serviceable parts. Do not open the device and do not modify the
device.
Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for
more information.
Replacing the Fuse
DANGER
Electric shock caused by short-circuit
●
Do not bypass the thermostatic switch or fuses.
●
For replacement use fuses of the same type and rating only.
Power surges, short-circuit or incorrect electrical power supply may cause a fuse to burn out. If the fuse
burns out, the device will not function anymore. If this happens, follow the steps below:
01)
Disconnect the device from the electrical power supply.
02)
Allow the device to cool down for at least 15 minutes.
03)
Loosen the fuse cover with a screwdriver and remove the fuse holder.
04)
If the fuse is brown or unclear, it is burned out. Remove the old fuse.
05)
Insert a new fuse in the fuse holder. Make sure that the type and the rating of the replacement fuse
are the same as the ones specified on the information label of the product.
06)
Replace the fuse holder in the opening and tighten the fuse cover.
8.
Deinstallation, Transportation and Storage
●
Disconnect power supply before deinstallation.
●
Use the original packaging to transport the device, if possible.
●
Clean the device before storing. Follow the cleaning instructions in chapter 7.2.1. Basic Cleaning
Instructions on page 29.
●
Store the device in the original packaging, if possible.
Summary of Contents for PA-380TU
Page 32: ...2022 DAP...
