background image

 

 

 

10 

 

  

 

 

Odin S-18 Line Array Sub 

Product code: D3971 

4.

 

Installation 

 

Safety Instructions for Installation 

 

WARNING 
Incorrect installation can cause serious injuries and damage of property. 

Installation must be carried out only by instructed persons. 

Follow all applicable European, national and local safety regulations concerning rigging and trussing. 

 

Make sure that the overhead structure can hold the weight of the device. 

 

Make sure that the installation location is free of any obstructions and the speaker cables do not 
come in contact with other objects. 

 

 

Attention 
Heavy object
 

This device is heavy. When handling, use a two-person lift to prevent injury. 

 

Personal Protective Equipment 

During installation and rigging wear personal protective equipment in compliance with the national and 
site-specific regulations. 

 

Installation Site Requirements 

 

The device must be installed only indoors. 

 

The device can be installed on a level stable surface, on a pole mount or it can be stacked and 
suspended on an overhead structure. 

 

The maximum ambient temperature t

a

 = 40 °C must never be exceeded. 

 

The relative humidity must not exceed 90 % with an ambient temperature of 40 °C. 

 

 

Summary of Contents for Odin S-18 Line Array Sub V1

























Reviews: