8
Ordercode: D6196
MA-8120WP Wall Control Panel
Maintenance
The MA-8120WP Wall Control Panel requires almost no maintenance. However, you should keep the unit
clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
MA-8120WP Wall Control Panel
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
01)
If the device does not operate properly, unplug the device.
02)
Check power from the wall, all cables, connections, etc.
03)
If all of the above appears to be O.K., plug the unit in again.
04)
If nothing happens after 30 seconds, unplug the device.
05)
Return the device to your DAP Audio dealer.
Product Specifications
Input sensitivity Mic Input: -50dB / 20kOhm, balanced
Input sensitivity Line Input: 0dB / 30kOhm, balanced
Frequency response: 20Hz – 20kHz
T.H.D.: < 0.1%
Signal to noise ratio: > 100dB
Power supply: DC +/- 15V (via CAT 5 by amplifier)
Dimensions: 80 x 80 x 45 mm (LxWxH)
Weight: 0,1 kg
Design and product specifications are subject to change without prior notice.
Website:
www.Dap-audio.info
Email:
