5
Rear panel
Fig. 2
13)
AC Inlet with integrated fuse holder.
This connector is meant for the connection of the supplied main cord. Connect one end of the
power cord to the connector, the other end to the mains, then turn on the power switch (1) to
operate the unit.
Note:
Please make sure that the supply voltage matches the operation voltage before connecting
the unit to mains.
Replace the fuse only with a fuse of same specification (T500mA).
14)
DC 24V Input.
Used to connect an external back up power supply of 24Vdc (e.g. Battery)
.
15)
GND Screw.
This screw offers a separate ground connection. Can be useful in case of grounding problems.
16)
Remote Data Link Ports.
Used to Link the remote to another device.
17)
Remote Data In Port.
Used to control this device remotely from a Weekly programmable Timer.
18)
Video out.
RCA video out for connecting to a video device (e.g. beamer).
19)
Audio Out L/R.
2 sets of stereo RCA and 1 mono jack outputs for connecting to an amplifier or mixer.
Summary of Contents for IPS-CD D6512
Page 1: ...IPS CD ORDERCODE D6512...
Page 13: ...2008 DapAudio...
