8
Troubleshooting
DAP Audio IPS-ASI
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps.
1.
If the device does not operate properly, unplug the device.
2.
Check the fuse, power from the wall, all cables, etc.
3.
If all of the above appears to be O.K., plug the unit in again.
4.
If you are unable to determine the cause of the problem, do not open the device, as this may damage
the unit and the warranty will become void.
5.
Return the device to your Dap Audio dealer.
Product Specifications
AC 110~120V / 220~240V, 60Hz / 50Hz
DC 24V
Power consumption
<10W
Input sensitivity
Mic: -52dBV 600Ω
AUX: -22dBV 10kΩ
Output Level
0dBV 600Ω
Frequency Response
35Hz - 15kHz
S/N
Mic input: >60dB AUX input > 75dB
Alarm Input Level
0V low level or +12V - 25V high level
Alarm Signal Output
Relay output N.O. (closed = alarm)
Alarm Channel
10 Channels
Weight
6.5kg
Dimensions(WxHxD)
483mm(W)x88(H)x370(D)mm
Power supply
Design and product specifications are subject to change without prior notice.
Summary of Contents for IPS-ASI
Page 1: ...IPS ASI ORDERCODE D6506...
Page 11: ...2007 DapAudio...
