DAPAudio FCS-56, Manual

Page: 6 / 12

Ordercode: D6576
FCS-56
Installation
01) Drill a hole in the ceiling, big enough to fit the speaker (Ø 204 mm).
02) Force the speaker grill out of the housing and remove the screws in order to access the cables and
connectors.
Fig. 01
03) Remove the speaker from the housing by removing the clamps.
04) Choose the desired output volume by connecting the red cable to one of the 4 available power
taps: 0,75/1,5/3/6W.
05) Connect the common cable to the (-) connector and the main feed cable the (+) connector.
Fig. 02
06) Put the speaker back in the housing, secure it with the clamps and replace the speaker grill.
07) Insert the speaker into the hole on the ceiling.
08) For extra safety, attach the speaker to the ceiling by means of a safety cable.
Fig. 03
5