DAPAudio EDGE EBT-1, User Manual, Page: 15 / 20

14
EDGE EBT-1
Product code: D1478B
6. Troubleshooting
This troubleshooting guide contains solutions to problems which can be carried out by an ordinary
person. The device does not contain user-serviceable parts.
Unauthorized modifications to the device will render the warranty void. Such modifications may result in
injuries and material damage.
Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the
solution is not described in the table.
Problem Probable cause(s) Solution
The device does not
function at all
No power to the device
● Make sure that the batteries are
inserted correctly
The batteries are depleted
● Change the batteries. See 4.3.1.
Installation of the Batteries on page 10
No sound
The device is switched off or does
not function correctly ● Make sure that the device is switched
on and the batteries are not depleted
The device is muted ● Make sure that the device is not muted
The volume is too low
● Turn up the volume on the receiver
● Make sure that the volume on the
connected devices is turned up
Channel selection
● Make sure that the receiver and the
device are paired. See 4.3.4. Pairing on
page 11
The device is out of range ● Move the device closer to the receiver
Connections are defective
● Examine connections and cables.
Correct defective connections. Repair
or replace damaged cables
Bursts of noise or other
audible signals
present
Sources of interference are present
● Adjust the squelch threshold of the
receiver
● Change the channel frequency
● Identify potential sources of
interference (other RF-sources) and turn
them off