DAPAudio EB-193, Product Manual

Page: 8 / 14

6
Unlocking the EB-193
1) Press and hold the set(5) button for 3 seconds. The display shows FREQUE.
2) Tap the set(5) button again, the display will show LOC ON.
3) Press the Down(2) buttonto turn the lock function on.
4) Press the set(5) button again. The display will briefly show STORE. Now the setting is
stored in memory.
Gain adjustment
1) Uncover the gain trimpot.
2) Turn the trimpot using the supplied screwdriver.
Tips for achieving maximum performance.
 Make sure you can always see a receiver antenna from the transmitter position.
 Keep the distance from transmitter to receiver antenna as short as possible.
 Point the receiver antennas away from each other at 45 degrees angle from vertical position.
 Avoid placing the receiver antennas near metal surfaces and obstructions.
 Replace battery as soon as low battery LED lights.
 If stacking or rack mounting receivers in a multiple system setup. Do not allow antennas to cross.

Perform a walk-through before performance or presentation. If dead spots are found, adjust the
location of the receiver. If dead spots remain, mark the dead spots and avoid them.