7
Lock
First hold the LOCK-button (
4
) for a few seconds, the display will show “
ö
”. The device is now in Lock-mode
and you cannot alter any values.
Press and hold the LOCK-button (
4
) again to disable the Lock function. The device returns to its original
function.
Equalizer
Press the EQ / RESET-button (
7
) to activate Parametric EQ octave, the display will also show the
Frequency & Gain.
If the “
:
” symbol is blinking, you can adjust the EQ.
You can select: LOW BAND EQ, MID BAND EQ or HIGH BAND EQ, using the jog-wheel.
Press the EQ / RESET-button (
7
) again. The “
F
” in the display will start blinking, meaning you are able to
adjust Frequencies between 250Hz-16KHz by using the jog-wheel.
Press the EQ / RESET-button (
7
) again. Now you are able to adjust the Gain between –12dB to +12dB. If
you press EQ / RESET-button (
7
) again, you return to the EQ adjustment. If you hold the button for more
than 3 seconds you will RESET the present program and it will be reset to the factory default settings.
Effect Off/ Bypass
Press the Bypass-button (
5
) to disable the sound effect. The display shows:
If you press this button again, the sound effect program is enabled. When the Bypass-button (
5
) is held
longer, the input signal will directly be sent to the output..
Hold this button again for a longer period to resume to program function.
Summary of Contents for DSP-2448 MKII
Page 1: ...DSP 2448 MKII ORDERCODE D2031 ...
Page 21: ...2006 DapAudio ...
