DAPAudio DS-850D, Product Manual, Page: 12 / 16

10
12. Changing Pitch of the song
There are three tools available for matching the BPM of the CD:
1. Use the pitch slider to adjust the BPM.
2. Use the PITCH BEND button to change the BPM temporarily.
3. Turn the Shuttle wheel to change the BPM temporarily.
• 1) Pitch-Slider
• To adjust the BPM by sliding the pitch slider up or down, press the PITCH button to turn on the
PITCH adjustment function before using.
• Slide the pitch slider up to decrease BPM, or down to increase BPM.
The adjustment range is +-12%.
• 2) Pitch-Bending
• The BPM increases or decreases respectively while the PITCH BEND+ or PITCH BEND- button is
pressed.
• The BPM increase depends on how long you hold the button. If you hold the button for about 5
seconds, the BPM will go either to +12% for PITCH BEND+ or -12% for PITCH BEND-. If you tap the
button, the BPM will only change a little so you can change the beat slightly without audible changing
in the music.
• The CD will return to the tempo indicated by the Pitch slider when you release the PITCH BEND+ or
PITCH BEND-buttons.
• 3) Turn the Shuttle wheel
• Turn the Shuttle wheel clockwise during play to increase the BPM in the forward direction,
counterclockwise to decrease the BPM. The faster you turn the wheel, the more BPM changes.
The BPM changes with a range of+/-12%.
• When you release Shuttle wheel, the CD will return to the tempo indicated by the pitch slider.
13. Program Play
1. Press the PROGRAM button, the player will enter the program mode and the CD will stop rotating.
2. Select the desired track by pressing the SKIP button, then press the PROGRAM button again. The
selected track will be added to the program sequence.
3. Repeat step 2. A maximum of 30 tracks can be programmed.
4. Press the PLAY/PAUSE button to start the program play from the first selection.
5. Press the program button again during program play to stop playing.
6. Press and hold the program button more than 2 seconds to cancel the program mode and erase all
the current program contents.
14. Loop PLAY
1. Press LOOP A button to set the loop start point A, the LOOP indicator will flash on the LCD.
2. Press LOOP B button to set the loop end point B, after the B point is set, the playback will
enter the loop play from A to B repeatedly.
3. Press one of the LOOP buttons again, the loop play function is canceled, the LOOP indicator dimms.
15. Reloop
1. If you press the Reloop button, the disc will go back to the last selected loop.
2. Press the button over and over rapidly to start the loop again and again.
3. Press one of the LOOP buttons again, the loop play function is canceled, the LOOP indicator dimms.
16. Repeat
1. Press the Repeat-button once to repeat the current track.
2. Press the button again to repeat the whole disc.
3. Press the button a third time, to exit the Repeat Mode.