17
DRX Passive Series
Model
DRX-15
System Type
2-Way Vented Passive Speaker cabinet
Continuous Power
200 Watts
Peak Power
400 Watts
Horn Coverage
50°H x 50°V
Speaker Sensitivity (1W.1m)
96 dB SPL ±3dB Max SPL: 122dB at 1m
Frequency Response
50Hz~20kHz (- 6dB)
Impedance
8Ω
Crossover Frequency
2.8KHz
Protection
High Frequency Protection
Low Frequency
15" Woofer - 2" Voice Coil
High Frequency
1" Driver - 1" Voice Coil
Enclosure Construction
15mm plywood cabinet, glued and reinforced, resistant
black paint; metal grille, rubber foot.
Mounting
One ABS plastic standard pole-mount
Connectors
2 x SPK4
Dimensions (H x W x D)
522 x 486 x 736mm
Troubleshooting
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1. If the device does not operate properly, unplug the device.
2. Check the fuse, power from the wall, all cables, etc.
3. If all of the above appears to be O.K., plug the unit in again.
4. If you are unable to determine the cause of the problem, do not open the device, as this may
damage the unit and the warranty will become void.
5. Return the device to your Dap Audio dealer.
