14
DLM-12A / DLM-12SA
Ordercode: D3223 / D3224
Technical Specifications
DLM-12A
System:
2-way Active Speaker system
Coverage:
90° conical
Transducer:
12" Woofer, 2.5" voice coil
Driver:
1" Exit Compression CELESTION Driver, 1.75" Voice Coil
Active Crossover:
1.85kHz-DSP Processed with 24dB slope
Digital Presets:
NORMAL / USER
Frequency response:
45Hz-20kHz (-10dB)
Max SPL @ 1m:
128dB
Power Amp:
High power 500W Low + 500W High
Input 1:
(MIC/Line) with Combo XLR/Jack
Input 2:
Combo XLR/Jack and RCA
Mix Output:
Male XLR balanced
USB Control (optional):
Gain/EQ/ Trim / high pass filter,and low pass filter and bandpass filter
External Control:
Volume Control
Electric Protection:
Thermal/Convection-Fan/Overload/Digital Lim./Compressor
Handling:
One standard 35mm metal pole-mount plus one handle on top
Enclosure:
15mm poplar plywood cabinet & ABS High-strength top and bottom
protectors
Dimensions (HxWxD):
414x388x365mm
Weight:
18,7Kg
DLM-12SA
System:
12" Active Subwoofer Speaker system
Transducer:
12" Woofer, 3" voice coil
Active Crossover:
60Hz - 120Hz-DSP Processor
Digital Presets:
NORMAL/ USER
Frequency response:
35Hz - 200Hz (-10dB)
Max SPL @ 1m:
128dB
Power Amp:
High power Class D 1000W
Inputs:
Female XLR balanced differential(stereo left/ right)
Input level:
Line -4dBu
Full range Output:
Male XLR balanced
High Pass Output:
Male XLR balanced
USB Control optional:
Gain/EQ/ Trim / high pass filter,and low pass filter and bandpass filter
External Control:
Volume Control
Electric Protection:
Thermal/Convection-Fan/Overload/Digital Lim./Compressor
Handling:
One standard 35mm metal pole-mount plus two handles
Enclosure:
15mm poplar plywood cabinet
Dimensions (HxWxD):
439x417x512mm
Weight:
18,7Kg
Troubleshooting
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1. If the device does not operate properly, unplug the device.
2. Check the fuse, power from the wall, all cables, etc.
3. If all of the above appears to be O.K., plug the unit in again.
4. If you are unable to determine the cause of the problem, do not open the device, as this may
damage the unit and the warranty will become void.
5. Return the device to your Dap Audio dealer.