DAPAudio D6160, Manual

Page: 6 / 16

PA-500
Ordercode: D6160
Description of the device
Features
The DAP PA-250 is a 250W, 100V plain amplifier. It is a reliable workhorse that can be used for many
applications. Inputs can be connected with terminals, balanced XLR or unbalanced RCA connectors.
The loop through is available to connect external audio processing, like equalizing enhancing or
feedback killers. The PA-500 can extend a DAP 100V PA system or be used for mobile rental applications.
It can also be combined with line mixers in a situation where 100V is an extension of a commercial audio
installation.
USP
•
Power consumption: 250W
•
100V & 8Ω: Terminals
• Line input: RCA, XLR & terminals
•
Loop through: RCA
•
Headphones: 6,3 mm jack
Inputs
• 1 x Line: RCA, XLR & terminals
General
•
Power supply: 230V AC, 50 Hz
•
Back-up power supply: 24V DC
• Power consumption: 500W
•
Power connection: IEC power connector
•
Fuse: T4AL/250V
• Dimensions: 330 x 482 x 95 mm (LxWxH)
19” x 2HE
• Weight: 12 kg
Frontside
Fig. 01
Power switch ON/OFF
Press the button to switch the device ON/OFF.
VU meter
The clip LED indicates peak levels at the output of the amplifier. If the red LED frequently blinks or
lights continuously, the output is likely to enter clipping. If this happens, we strongly suggest
decreasing the signal source volume.
Headphones 6,3 mm jack IN
Use this connector to connect 6,3 mm jack headphones.
5